-
The anti-collision barrel is mainly set on the highway and urban roads are prone to collisions between cars and fixed facilities in the road, such as: the road bend, road kiosks, toll stations and elevated road entrance and exit, parking lots, neighborhoods, gardens, gas stations, etc., to play a...Read More »
-
1. Road cones are also called traffic cones and cone-shaped road signs; there are two main materials: 1. Rubber; 2. Plastic. Plastic is more weather-resistant, environmentally friendly and flexible than rubber; 2. There are three main colors of road cones: red, yellow, and blue. Red is mainly use...Read More »
-
Shock-absorbing belt material on the road: Made of high-strength rubber. That is, rubber speed bumps. The scientific name is rubber deceleration ridge. It is designed based on the angle principle of the tire and the special rubber on the ground when the car is running, and is made of special rubb...Read More »
-
Rubber speed bumps are common in places such as unit squares and residential quarters, and are about 5 cm above the ground. They are usually fixed to the ground with casing expansion screws, yellow and black, visually obvious, low price, but short service life, often appear After the rubber speed...Read More »
-
Foundation pit fence (foundation pit fence) is also called foundation pit fence, foundation pit side fence, etc. The building construction fence produced by the transportation facility wholesale manufacturer is composed of protective mesh and uprights. Foundation pit guardrails are generally used...Read More »
-
Speed bumps, also known as speed bumps, are traffic facilities installed on highways to slow passing vehicles. The shape is generally strip-like, but also point-like; the material is mainly rubber, but also metal; generally yellow and black to attract visual attention, so that the road is slightl...Read More »
-
The corner of the wall is mainly made of acrylic, aluminum alloy and other materials, and the base material is bent into a 90-degree contour through hot bending, bending and other processes, so as to protect the corner from collision and scratch. Main categories: acrylic uv printing, screen print...Read More »